Procurement Support

B4T - Barter 4 Things

Company's House No: 10086768

Requesting the tender of the following;

1. PCB Services
   1. Board and component layout
   2. TI MSP430 and WISOL design
   3. Prototype testing
   4. Power consumption modelling and testing
   5. Radio testing
   6. Gerber file production and management
   7. All IP and designs to be retained by the client
2. Software Development
   1. Requirements and change control management
   2. C/C++ embedded software design to the existing code base
   3. Code management
   4. All IP and designs to be retained by the client

Please have all

RAD Propulsion Ltd
Company No. 11700102
Request For Quotation 1:

Introduction:
RAD Propulsion is a UK based company that is developing a range of marine electric propulsion
systems for use on small boats (up to ~7m).
As part of its expanding product range, we are developing a remote throttle unit and separate tag
which can be used to control its electric drives. To support this activity, we require a contractor to
productise the current prototype design and design/produce tooling and first off samples

RAD Propulsion Ltd
Company No. 11700102
Request For Quotation 2:

Introduction:
RAD Propulsion is a UK based company that is developing a range of marine electric propulsion
systems for use on small boats (up to ~7m).
RAD Propulsion is looking for a contractor to support the preparation and initial filling of Patents to
cover various aspects of its products

Technical Requirements:
Support to the submission of four UK patent applications, to include:
 Searches
 Preparation
 Filing
 Monitoring
 Answering/

RAD Propulsion Ltd
Company No. 11700102
Request For Quotation 3:

Introduction:
RAD Propulsion is a UK based company that is developing a range of marine electric propulsion
systems for use on small boats (up to ~7m).
RAD Propulsion is looking for a contractor to support the development and supply of a sensing
device for use in the kayak/SUP market

Technical Requirements:
 Development, design and test of sensor
 Provision and supply of software and/or hardware

Timing:
The total project length is 3 month

Eco Tooth Ltd 

Company No. 11856455 

Request For Quotation: 

Introduction -  

Eco Tooth is currently developing new toothbrush bristle technology with Innovate UK funding support. To  develop the ‘BioBristle’ project further we require provision for 8 formulations (Phase 1) & 4 formulations  (Phase 2) including PLA/PA controls based on PLA.  

This also includes prototyping of critical tufting 'BioBristle’ requirements for our final product Tooth.Head. 

Technical Requirements -  

Material procurement

Eco Tooth Ltd
Company No. 11856455
Request For Quotation:

Introduction -
Eco Tooth is currently developing new toothbrush bristle technology with Innovate UK funding support. To
develop the ‘BioBristle’ project further we require tooling and extrusion with multiple test parameters from a
commercial contractor.

Technical Requirements -
SEM (Scanning Electron Microscope)
Injection moulding of monofilament extrusion material - x8 formulations (PA Controls + PLA Development
Blends)
Testing of tensile, bending

The Burlington Hotel is looking to replace the air conditioning throughout our impressive restaurant and bar.

Tenders for the supply and installation of Panasonic air source heat pump system are invited. The successful installer will be fully Panasonic trained and have a track record of successful Panasonic installations through restaurants and hotels of which references can be taken.

This tender is open from 20th January for 10 days. Installation must be completed by end of February 2021 as the

Qualitas Healthcare

Company Number 12822803

Tenders are invited for the following in the Qualitas Healthcare Group to assist in the transition of our care homes towards becoming more energy efficient;

1. QH Greenhill, Newton Abbot – Company Number 10785909 

Lighting upgrades to LED within a care home setting based in Newton Abbot. All work should be undertaken and certified to current 18th edition electrical standards. Approximately 300 fittings are to be upgraded, Insulation- throughout all c

QH Greenhill Limited

Company No. 10785909

Request for Quotation

Tenders are invited for lighting upgrades to LED within a care home setting based in Newton Abbot.

The successful company will have experience within the sector and engineers will carry current DBS certificates and comply with a strict Covid policy. Work is to be undertaken during January 2021.

All work should be undertaken and certified to current 18^th edition electrical standards. Approximately 300 fittings are to be upgraded,

T

Warrens Office Ltd

Company number 01613232

Request for quotation

Warrens Office is currently looking to replace their existing fleet of delivery vans, and through extensive research are looking for quotes for a Mercedes eVITO Panel Van.

All quotations are to be sent to Paul Morgan via paul@warrensoffice.co.uk by Saturday 12th December 2020

BLUE DOLPHIN (UK) Ltd

Company No. 6059201                  VAT No. 900 8403 60

Request for Quotation

Introduction

Blue Dolphin (BD) is currently developing lightweight aeronautical cylindrical cells (LACS) technology with Innovate UK funding support. To develop the technology further the LACS project requires 21700 cell chemistry to be supplied by a suitable, commercial contractor.

Technical Requirement

A Lithium Nickel Manganese Cobalt Oxide (NMC) chemistry in the 21700 format is required for a hig

BLUE DOLPHIN (UK) Ltd

Company No. 6059201                  VAT No. 900 8403 60

Request for Quotation

Introduction

Blue Dolphin (BD) is currently developing lightweight aeronautical cylindrical cells (LACS) technology with Innovate UK funding support. To develop the technology further, the LACS project requires mechanical and electrochemical
testing of 21700 battery cells to be conducted by a suitable, commercial contractor.

Technical Requirement

1) To perform standard battery cell cycling operations

FUSSY (UK) Ltd

Company No. 12462889

Request for Quotation

Introduction

fussy is developing sustainable personal care products and their first product is a refillable deodorant. To bring this to market they require a manufacturing partner to undertake the design for manufacturing, tooling, QA and first production run. The product is already designed and here are two main components to the product:

1. An outer deodorant container made from PLA
2. An inner deodorant refill made from sugarcane

Technical Requi